"ISOPROTEC" PE sleeve for "ISOPROTEC cover"

To embed in a slab poured by professional builders. The round sleeve allows the posts to be positioned every 90°.

"ISOPROTEC" PE full covers for stall posts meet a primary need in cattle housing structures.
The protective zinc deposited by hot galvanisation on the tubular support posts degrades more or less quickly over time.
This zinc, attacked by the acids present in the slurry and by the magnetic fields of livestock buildings (more or less well grounded), disappears over time resulting in rust which can destroy the post.
To date, there are no solutions on the market to achieve perfect sealing between the posts and the floor or the interlocking sleeves in which they are slotted. Infiltrations always end up corroding the posts over time.
"ISOPROTEC" PE full covers offer perfect sealing. They are made of one-piece rotomolded PE, which is much less brittle than injection, and has a flexible seal at the top.
This protection can be slotted onto all round or square Cosnet posts to be embedded.
It offers the possibility either of sealing directly in the concrete or of being slotted into a PE "ISOPROTEC" sleeve to be embedded in the ground to make them removable during cleaning.

"ISOPROTEC" PE sleeves are to be embedded in the concrete flush with the floor.
They are designed, according to the model, to accommodate Ø 102 mm or square 90 x 90 mm posts fitted with an "ISOPROTEC" cover.
They allow the posts to be easily removed from their location during cleaning.